244000814 - 1056B71 INJECTOR (ONE) - R.R. INCLUDING REPLACING SEAL
Removing
(
Refitting
)
- Disconnect the negative battery terminal.1. Disconnect the electrical connection for the injector.2. Undo the bolt fixing the wiring (2a) and move the cable loom (2b) aside.3. Remove the injector mounting bracket.4. Extract the injector which is a press fit.
Refitting
(
Removing
)
- Press fit the injector.- Fit the injector mounting bracket.- Tighten the bolt securing the cable loom.- Connect the electrical connection removed previously.
Removing
(
Refitting
)
- Disconnect the negative battery terminal.1. Disconnect the electrical connection for the injector.2. Undo the bolt fixing the wiring (2a) and move the cable loom (2b) aside.3. Remove the injector mounting bracket.4. Extract the injector which is a press fit.