244000916 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

Removing ( Refitting ) - Disconnect the negative battery terminal.1. Disconnect the electrical connection for the solenoid valve. - Disconnect the rapid connector for the active charcoal filter.- Remove the band and move the pipe away from the throttle casing.1. Release the solenoid valve from the housing and the connected pipes. - Undo the bands and remove the pipes.1. Extract the solenoid valve from the plastic housing. Refitting ( Removing ) - Fit the solenoid valve in the plastic housing.- Fit the pipes and fasten them using the retaining band.- Fit the solenoid valve in the housing and the connected pipes.- Fit the band and the pipe to the throttle casing.- Connect the rapid connector for the active charcoal filter.- Connect the electrical connection for the solenoid valve.- Connect the negative battery terminal.