4130A10 POWER STEERING BOX - R+R - CHECK TOW-IN IF NECESSARY SEPARATELY - INCLUDES BLEEDING - Fiat - DUCATO - eLearn

244001166 - 4130A10 POWER STEERING BOX - R+R - CHECK TOW-IN IF NECESSARY SEPARATELY - INCLUDES BLEEDING

) - Disconnect the negative battery terminal. Op. 7055B54 UNDER-ENGINE GUARD - R R - Position a suitable container for collecting the power assisted steering fluid from the steering box.1. Undo the connectors on the steering box (1a) and disconnect the two pipes (1b) connected to it.

1. Undo the bolt fixing the lower shaft to the power assisted steering box pinion.

1. Undo the nut fixing the track rod end to the steering knuckle.2. Extract the track rod end (2b) from the housing in the steering knuckle using the tool (2a).

	Description	Code	Function
2a	Head extractor	1.847.038.000	Ball joint removal

Carry out the same operation on the other track rod end using the same tool.

1. Undo the bolts securing the power assisted steering box to the crossmember.

1. Undo the fixing nut and disconnect the connecting rod for the anti-roll bar from the track control arm.2. Loosen the nut fixing the anti-roll bar in order to be able to move it outside of the working area.

1. Remove the power assisted steering box from the timing side wheel arch.

Refitting ( Removing

) - Fit the power assisted steering box in the timing side wheel arch.- Tighten the nut fixing the anti-roll bar.

	Value - daNm	Fastening	Component	Ø
.	5,6	Nut	FRONT ANTI-ROLL BAR JOINTS	M12

- Tighten the nut fixing the anti-roll bar connecting rod to the track control arm.

	Value - daNm	Fastening	Component	Ø
.	8	Nut	FRONT ANTI-ROLL BAR SUPPORTS	M12

- Tighten the bolts securing the power assisted steering box to the crossmember to torque.

	Value - daNm	Fastening	Component	Ø
.	11	Bolts	POWER STEERING BOX	M12

- Reposition the track rod ends in the housings in the steering knuckle and tighten the fixing nuts to torque.

	Value - daNm	Fastening	Component	Ø
.	6.9	Nut	ADJUSTABLE LINK BALL JOINTS	M16

- Tighten the nut fixing the lower shaft to the power assisted steering box pinion to torque.

	Value - daNm	Fastening	Component	Ø
.	2,5	Bolt	FIXED ELEMENTS STEERING SHAFT STEERING	M8

- Connect the fluid pipes to the steering box and tighten the connectors to torque.

	Value - daNm	Fastening	Component	Ø
.	5,5	Nut	PIPE BTWN PUMP + POWER STEERING BOX	M16

	Value - daNm	Fastening	Component	Ø
.	6,3	Nut	RETURN PIPE TO POWER STEERING RESERVOIR	M18

- Refill the power assisted steering system using the appropriate fluid.

	Description	Qty.	Component	Type	Classification
.	TUTELA GI/A	1.3 litri	POWER ASSISTED STEERING CIRCUIT	Oil	ATF DEXRON 2 D LEV SAE 10 W

Op. 7055B54 UNDER-ENGINE GUARD - R R- Connect the negative battery terminal. See in Op. 1008C32 See in Op. 1008C32