244000632 - 1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Position the tool for supporting the power unit fastened to the crossmember for the suspension and to the lower crossmember under the engine oil sump.
DescriptionCodeFunction
.Engine mounting beam1.870.735.000Support power unit
- Lower the lift.1. Undo the bolts securing the power steering fluid reservoir bracket.2. Remove the power assisted steering fluid reservoir complete with bracket.
1. Undo the bolts and the nut fixinf the flexible mounting to the rigid power unit support on the engine.2. Undo the nuts fixing the flexible mounting to the bodyshell.3. Remove the flexible mounting from the engine compartment.
Refitting ( Removing ) - Fit the flexible mounting in the housing in the engine compartment.- Tighten the nuts fixing the flexible mounting to the bodyshell.
Value - daNmFasteningComponentØ  
.(body block) 5NutsFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM10
- Tighten the nut and the two bolts fixing the flexible mounting to the timing side rigid power unit support to torque.
Value - daNmFasteningComponentØ  
.(Rigid mount on engine) 5BoltFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM10
Value - daNmFasteningComponentØ  
.(Rigid mount on engine) 8NutFRONT FLEXIBLE MOUNTING BLOCKS, POWER UNITM12
- Fit the engine coolant reservoir and tighten the nuts fixing it to the bodyshell.- Connect the coolant delivery pipe to the pump.- Fasten the electrical connection in the housing on the tank.- Connect the band retaining the coolant pipe to the cylinder head.- Fit the power steering fluid reservoir complete with bracket.- Remove the tool used to support the power unit previously secured to the suspension beam and lower crossmember from beneath the engine sump.
DescriptionCodeFunction
.Engine mounting beam1.870.735.000Support power unit
    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.