1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE - Fiat - DUCATO - eLearn

244000633 - 1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE

) - Position the vehicle on a lift.1. Disconnect intake hose from the air filter casing and from the cold air intake on the crossmember.2. Remove the cold intake and intake hose from the engine compartment.

See in Op. 1048A10- Raise the vehicle. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle and position a hydraulic arm support beneath the gearbox to support the engine.1. Undo the bolts fixing the gearbox side flexible mounting to the rigid support.2. Undo the nuts securing the flexible block to the body.3. Remove the gearbox side power unit flexible mount.

Refitting ( Removing

) - Fit the gearbox side rigid engine support.- Tighten the nuts fixing the gearbox side flexible mounting to the rigid support.

	Value - daNm	Fastening	Component	Ø
.	5	Nuts	GEARBOX SIDE RUBBER MOUNT	M10

- Tighten the nuts securing the flexible block to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	(body) 5	Nut	GEARBOX SIDE RUBBER MOUNT	M10X1.5

- Remove the hydraulic arm positioned previously to support the gearbox. See in Op. 1048A10 Op. 7055B54 UNDER-ENGINE GUARD - R R- Fit the cold air intake hose and connect it to the air filter casing and to the air intake on the crossmember.- Remove the vehicle from the lift.