244000661 - 1020D14 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANK SHAFT, TIMING SIDE

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 1092G10 SINGLE ENGINE BELT R R See in Op. 1092A10 See in Op. 1032D12 See in Op. 1032B10 See in Op. 1032B44    Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION1. Undo the bolts securing the front crankshaft oil seal cover.2. Remove the front crankshaft oil seal cover from its seat. Refitting ( Removing ) - Remove the oil sealing ring from its seat on the front cover.

Because the oil seal must always be replaced, it may be destroyed when it is removed.

- Apply sealant to the front cover.

	Description	Qty.	Component	Type	Classification
.	DOW CORNING 7091	-	FRONT COVER CRANKSHAFT	Silicone sealant	-

- Fit the cover and tighten the fixing bolts to the recommended torque.

	Value - daNm	Fastening	Component	Ø
.	1,5	Bolt	FRONT COVER CRANKSHAFT	-

1. Fit the seal using the tool.

	Description	Code	Function
.	Fitting tool	1.860.855.000	Fitting crankshaft front oil seal

    Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION See in Op. 1032B44 See in Op. 1032B10 See in Op. 1032D12 See in Op. 1092A10    Op. 1092G10 SINGLE ENGINE BELT R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.