244000873 - 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1048A21 See in Op. 1048A50    Op. 1048B16 PIPES AND/OR ELBOW BETWEEN TURBOCHARGER AND THROTTLE CASING - R.R.    Op. 1048B12 RIGID PIPE CARRYING AIR BETWEEN TURBOCHARGER AND INLET MANIFOLD - R+R See in Op. 1076B50 See in Op. 1064A19 See in Op. 1088B10 See in Op. 1080C171. Disconnect the vacuum pipe from the EGR valve.2. Disconnect the electrical connection for the heater plugs control unit.
DescriptionConnector
2Heater plugs control unitM015C
3. Undo the fixing nuts (3a) and move the mounting bracket (3b) complete with solenoid valve and heater plugs control unit aside.
1. Disconnect the two engine coolant pipes on the exhaust gas heat exchanger.
1. Undo the lower nuts and the upper bolts fixing the intake manifold to the cylinder head.- Lower the lift.2. Remove the intake assembly from the upper part of the engine compartment.
Refitting ( Removing ) - Fit the intake assembly to the upper part of the engine compartment.- Raise the vehicle.- Tighten the lower nuts and the upper bolts fixing the intake manifold to the cylinder head to torque.
Value - daNmFasteningComponentØ  
.2,3BoltINLET MANIFOLD-
Value - daNmFasteningComponentØ  
.2,3NutINLET MANIFOLD-
- Connect the engine coolant pipes on the exhaust gas heat exchanger.- Fit the mounting bracket complete with solenoid valves and heater plugs control unit in the housing.- Tighten the bulkhead fixing nuts.- Connect the electrical connection for the heater plugs control unit.
DescriptionConnector
.Heater plugs control unitM015C
- Connect the vacuum pipe to the EGR valve. See in Op. 1080C17 See in Op. 1088B10 See in Op. 1064A19 See in Op. 1076B50    Op. 1048B12 RIGID PIPE CARRYING AIR BETWEEN TURBOCHARGER AND INLET MANIFOLD - R+R    Op. 1048B16 PIPES AND/OR ELBOW BETWEEN TURBOCHARGER AND THROTTLE CASING - R.R. See in Op. 1048A50 See in Op. 1048A21    Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 7055B54 UNDER-ENGINE GUARD - R R- Position the vehicle on the lift.