244000925 - 1084B10 ENGINE OIL PUMP - R + R WITH CRANKCASE SUMP REMOVED

Removing ( Refitting )     Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 1092G10 SINGLE ENGINE BELT R R See in Op. 1092A10 See in Op. 1032D12 See in Op. 1032B10 See in Op. 1032B441. Undo the bolts securing the front crankshaft oil seal cover.2. Remove the front crankshaft oil seal cover from its seat.
1. Undo the fixing bolts.2. Remove the oil pump (2a) complete with drive chain (2b), pinion (2c) and tab.
Refitting ( Removing ) - Fit the engine oil pump tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.1BoltENGINE OIL PUMP-
- Fit the chain, the pinion and the pinion fastening tabs.- Remove the oil sealing ring from its seat on the front cover.
Because the oil seal must always be replaced, it may be destroyed when it is removed.
DescriptionQty.ComponentTypeClassification
.DOW CORNING 7091-FRONT COVER CRANKSHAFTSilicone sealant-
- Apply sealant to the front cover.
Value - daNmFasteningComponentØ  
.1,5BoltFRONT COVER CRANKSHAFT-
- Fit the cover and tighten the fixing bolts to the recommended torque.
DescriptionCodeFunction
1Fitting tool1.860.855.000Fitting crankshaft front oil seal
1. Fit the seal using the tool.
See in Op. 1032B44 See in Op. 1032B10 See in Op. 1032D12 See in Op. 1092A10    Op. 1092G10 SINGLE ENGINE BELT R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.