244000939 - 1084C10 STAFFA DI SUPPORTO DEL RADIATORE RAFFREDDAMENTO OLIO MOTORE - R.R.

Removing ( Refitting )     Op. 7055B54 UNDER-ENGINE GUARD - R R- Position a suitable container under the oil filter to collect the engine oil.1. Remove the engine oil cartridge filter.
- Position a suitable container for collecting the engine coolant under the heat exchanger.1. Using a special tool, disconnect the engine coolant inlet and outlet pipes from the oil cooling heat exchanger.
DescriptionCodeFunction
.Caliper1.831.138.000Band opening
1. Undo the fixing pin (1a) and remove the oil cooling heat exchanger (1b).
Refitting ( Removing ) - Position the oil cooling heat exchanger on the oil pump front cover.- Tighten the pin fixing the oil cooling heat exchanger to torque.- Connect the engine coolant inlet and outlet pipes to the oil cooling heat exchanger.- Tighten the oil filter by hand and lubricate the filter seal with engine oil.- Check the quantity of oil in the engine.- Check the quantity of coolant in the engine.- Top up, if necessary, using the same engine coolant.    Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 7055B54 UNDER-ENGINE GUARD - R R