244000942 - 1088B10 ENGINE COOLING TANK - R + R

Removing ( Refitting ) 1. Disconnect the collare securing the coolant hoses to the reservoir.2. Undo the nuts securing the engine coolant reservoir.3. Disconnect the coolant supply pipe to the water pump (3a) and remove the coolant reservoir (3b).

Recover any coolant that emerges.

Refitting ( Removing ) - Fit the engine cooling reservoir and tighten the retaining nuts.- Connect the hose to the rigid section of the coolant inlet pipe to the reservoir.- Connect both recirculation pipes leading from the cylinder head and from the radiator to the reservoir.    Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY