244000945 - 1088B20 ENGINE COOLING RADIATOR - R + R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1088E12 See in Op. 1088E131. Disconnect the recirculation pipe from the engine coolant reservoir.
1. Disconnect the coolant lower sleeve (1a) and upper sleeve (1b) from the radiator and drain the engine coolant system.
Collect the coolant in a suitable container.
1. Undo the fixing bolts.2. Remove the front grille.
1. Working via the front grille compartment, undo the bolts fixing the plastic guard to the radiator.2. Undo the upper radiator retaining bolts.3. Remove the engine cooling radiator from the upper part of the engine bay.
Refitting ( Removing ) - Fit the engine cooling radiator in the upper part of the engine bay.- Tighten the bolts securing the upper radiator brackets to the beam to torque.
Value - daNmFasteningComponentØ  
.(Beam) 2BoltsENGINE RADIATORM8
- Tighten the bolts securing the upper radiator brackets to the radiator to torque.
Value - daNmFasteningComponentØ  
.(Radiator) 2BoltsENGINE RADIATORM8
- Working via the front grille compartment, tighten the bolts fixing the plastic guard to the radiator.- Fit the front grille and tighten the bolts.- Connect the upper and lower cooloant sleeves to the radiator.- Connect the recirculation pipe to the engine coolant reservoir. See in Op. 1088E13 See in Op. 1088E12    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 7055B54 UNDER-ENGINE GUARD - R R