244000982 - 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 1092G10 SINGLE ENGINE BELT R R- Disconnect the electrical connection for the rpm sensor.
DescriptionConnector
.Rpm sensorK046
1. Undo the fixing bolt.2. Remove the rpm sensor.
1. Fit the flywheel lock in the housing for the rpm sensor.
DescriptionCodeFunction
1Flywheel lock1.870.765.001Prevent flywheel rotation
1. Undo the fixing bolts (1a) and remove the auxiliary shaft drive pulley (1b).
Refitting ( Removing ) - Fit the auxiliary shaft drive pulley and tighten the fixing bolt to torque using the angular tightening tool.
Value - daNmFasteningComponentØ  
.4+51°BoltCRANKSHAFT PULLEY-
DescriptionCodeFunction
.Torque wrench1.860.942.000Connecting rod cap bolt angular tightening
- Remove the flywheel lock fitted previously.
DescriptionCodeFunction
.Flywheel lock1.870.765.001Prevent flywheel rotation
- Fit the rpm sensor in the housing on the bellhousing and tighten the fixing bolt.- Connect the electrical connection for the rpm sensor.
DescriptionConnector
.Rpm sensorK046
    Op. 1092G10 SINGLE ENGINE BELT R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.