2. Undo the bolts (2a) and remove the pressure plate and the clutch disc (2b).
Refitting
(
Removing
)
1. If there are signs of wear, overheating or deep grooves on the pressure plate, replace the assembly.2. If the linings are excessively worn, the complete driven disc must be replaced.
- Fit the driven disc and the pressure plate and align them using the clutch centering tool.
Description
Code
Function
.
Clutch locating tool
1.875.086.000
Driven plate locating
- Tighten the bolts fixing the clutch to the flywheel to torque.- Remove the flywheel lock.
Removing
(
Refitting
)
1. Fit the flywheel lock.
