244001018 - 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R

Removing ( Refitting ) - Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the connector and disconnect the flexible pipe from the master cylinder (pump) pipe.- Lift up the spring (2a) and remove the vibration damper (2b). Refitting ( Removing ) - Fit the vibration damper and connect the fastening spring.- Tighten the connector for the master cylinder flexible pipe.    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR    Op. 7055B54 UNDER-ENGINE GUARD - R R