244000436 - CONNECT

Connect is the infotelematic system fitted to this vehicle. It interacts with the user to facilitate driving and make life inside the passenger compartment as pleasant as possible.The Connect system is not fitted to the vehicle as standard but is available as an option.

COMPOSITION

System architecture

The Connect system consists of:

• FRONT PANEL (1), which acts as the physical interface between system and user. It incorporates a display, a numerical keypad and function keys.
• SILVER BOX (2), containing the motherboard, radio module, GSM module and Audio CD player/CD ROM drive

Connect configurations

The Connect system is also available in the following configurations: LEVEL 1 (L1), LEVEL 2 (L2), LEVEL 3 (L3), LEVEL 4 (L4).L1, includes the following modules:

• Radio
• CD player
• GSM Module
• GPS Module
• Assistance services
• 192x80 pixel LCD graphic display
• External CD CHANGER system (if present)
• Options: WAP protocol + MP3

L2, includes the following modules:

• Radio
• CD player
• GPS Module
• Independent navigation with pictograms
• 192x80 pixel LCD graphic display
• External CD CHANGER system (if present)

L3, includes the following modules:

• Radio
• CD player
• GPS Module
• GSM Module
• Independent navigation with pictograms
• Targasys Services
• 192x80 pixel LCD graphic display
• External CD CHANGER system (if present)
• Options: WAP protocol + MP3

L4, includes the following modules:

• Radio
• CD player
• GPS Module
• GSM Module
• Independent navigation with maps
• Targasys Services
• 5" TFT (Thin Film Transistor) display
• Options: Telepass information display (if present), external CD CHANGER system (if present), built-in voice recognition module, MP3

Description of internal modules

Various different modules make up the system for providing services or obtaining information.

CD player

The CD drive can read the and manage the audio CD to play music CDs and read CD ROMs.Connect is also designed to be connected to an external CD Changer and to accept analogue audio output. The device for which it is designed as a Blaupunkt CD changer.The CD Changer is not supplied as standard with the Connect system.

GSM phone

Connect L1 and L4 are equipped with a Dual Band module and Sim Card reader (that allows the user the insert a SIM Card).The SIM reader is designed for an ISO format SIM Card.A plug-in format Sim Card can be used only with an ISO adaptor.

Radio module

The module comprises:

• Tuner
• Audio power amplifier
• Control software
• Interface for external CD changer
• Interface for external audio inputs

AUDIO INPUTS:

• Phone audio (analogue - mono)
• Navigator audio (analogue - mono)
• CD-DA audio player inside Connect
• Audio for CD-Changer external to Connect (analogue - stereo [from ISO connector])

AUDIO OUTPUTS:

• Output with 4 amplified analogue audio channels.
• Preparation for interface with BOSE system.

AUDIO SOURCE MANAGEMENTThe selected source is mixed in the navigator when fitted and in use.Audio sources may be heard from all speakers.

Description of controls

The Connect front panel, shown in the following figure (Fig. 2), houses the keys that allow the user to control the system.Some keys perform multiple functions that depend on the active system operating conditions.Activation of the selected function is controlled, in some cases, by the length of time for which the key is pressed (short or long push) as described in the following table.Some Connect functions are managed by controls on the steering wheel.Connect is designed to receive certain voltage levels (4 levels per channel), each corresponding to depression of a key on the steering wheel, as input to two separate channels.

Key	Short press on key (less than 1 second)	Long press on key (more than 1 second)
T4 - T5 - T6 - T7 - T8 - T9	Numbers "1", "2", "3", "4", "5", "6" on phone keypad. Stored station recall	Storing station nos. 1-2-3-4-5-6
T10	Number 7 on phone keypad. Select previous CD on CD-Changer (if installed)	-
T11	Number 8 on phone keypad	-
T12	Number 9 on phone keypad. Select next CD on CD-Changer (if installed)	-
T14	Number 0 on phone keypad. Audio CD Play/Stop	Audio CD play pause
T13	(*) symbol on phone keypad. Radio mode: search for first available station with lower frequency. CD mode: select previous track	-
T15	(#) symbol on phone keypad. Radio mode: search for first available station with higher frequency. CD mode: select next track	-
T1	Send phone cal Accept incoming call End current phone call	Refuse incoming phone call
T2	Activate/deactivate voice recognition	Store voice command
T16	Select operating mode: FM1-FM2-FM3-LW-MW-CD-CDC(if installed)	-
R1	This knob is known as an encoder. Turn system on/off (press knob). Adjust volume (turn knob)	-
T17 MAIN/DARK	Select main screen	Darken monitor (stand-by)
T18 AUDIO/OFF	Select radio screen. Turn on radio	Turn of radio
T19 TEL/OFF	Select phone screen. Activate phone function	Deactivate phone function
T20 NAV/MUTE	Select navigation function	Exclude navigation voice messages (NAV/MUTE function) Reset voice messages
T21 TRIP	Select on-board computer screen	-
R2	This knob is known as an encoder. Select function (turn knob). Confirm selected function (pres knob). Activate drop-down menu (press knob with MAIN screen)	-
T24 ESC	Exit selected screen. Return to next menu level up and cancel unconfirmed functions	-
T23 RPT	Repeat last navigation voice instruction	-
T22 Connect	Display emergency or assistance call menu	-
T3	Eject navigation CD-ROM or audio CD	-
B	SIM phone card slot	-
A	Navigation or Audio CD slot	-
C	- Optical sensor for automatic switching of display lighting between night and day settings.

Interfaces

CD Charger

CONNECT all levels) is also designed to be connected to an external CD Changer and to accept analogue audio output.The interface consists of:

• 3-wire stereo analogue input (right, left, reference)
• 2-wire serial control (Rx, Tx)
• Activation signal (Vswitched)
• Permanent power source (Vbatt, GND)

HI-FI system

The CONNECT system is designed to interface with the hi-fi system.The interface consists of:

Interface with CAN network (Option)

The CONNECT system is designed to interface components with a CAN bus.

Video input

CONNECT is designed to interface with an external video source (parking TV camera) so that it can show imagines on the displayThe interface is an NTSC-format composite video type.Two pins of the MQS connector are dedicated to this interface. These are connected to the video signal and reference (cable and shield).

PC interface

CONNECT is designed to interface with a PC via a RS232 serial port.

Connect Electrical Absorptions

CONNECT power uptakes during the possible operating modes are as follows:

• CONNECT OFF: Imax = 3.2 mA / 13.5V
• CONNECT Stand-By: Imax = 1A / 13.5V
• CONNECT ON: 1.2A / 13.5V %lt; I %lt; 7A / 13.5V

Minimum and maximum power uptakes shown with CONNECT ON are determined by the following operating conditions:

• Screen off, GSM on, radio off: 1.2A / 13.5V
• Screen on, GSM on, radio off: 2A / 13.5V
• Contribution of radio on: 5A / 13.5V

Connectors

Connector arrangement

The arrangement of connectors on the rear of Connect is shown below.

PIN OUT

Connect connector pin-out.8 pin connector (A)

Pin	Function
1	n.c.
2	n.u.
3	n.c.
4	Key on input (+Key)
5	12 V for aerial amplifier
6	n.c.
7	12 V permanent
8	Power supply GND

8 pin connector (B)

Pin	Function
1	+ RH rear speaker
2	- RH rear speaker
3	+ RH front speaker
4	- RH front speaker
5	+ LH front speaker
6	- LH front speaker
7	+ LH rear speaker
8	- LH rear speaker

20 pin connector (C)

Pin	Function
1	n.c.
2	n.c.
3	n.c.
4	n.c.
5	n.c.
6	n.c.
7	Tx [serial RS232]
8	Rx [serial RS232]
9	n.c.
10	Input 1 for Keys on Steering wheel
11	Input 2 for Keys on Steering wheel
12	Steering wheel Key reference
13	n.u.
14	n.u.
15	n.u.
16	n.u.
17	n.u.
18	n.u.
19	n.u.
20	n.u.

18 pin connector (D)

Pin	Function
1	DCD [serial RS232]
2	Telepass serial
3	Reversing Signal Input
4	Composite video earth screen
5	Composite vide

... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ...