Removing
(
Refitting
)
See in Op. 1048B141. Disconnect the rapid connector pipes.2. Open the retaining band and release the pipe.3. Release the fuel return pipe from the injectors.4. Undo the fixing bolt.5. Remove the fuel return manifold pipe.
Refitting
(
Removing
)
- Place the fuel return manifold pipe in position.- Tighten the fixing bolt.- Connect the rapid connector pipes.- Connect the pipe and tighten the retaining band.- Press fit the fuel return pipe from the injectors. See in Op. 1048B14
Removing
(
Refitting
)
See in Op. 1048B141. Disconnect the rapid connector pipes.2. Open the retaining band and release the pipe.3. Release the fuel return pipe from the injectors.4. Undo the fixing bolt.5. Remove the fuel return manifold pipe.