244000840 - 1060F36 LINES TO INJECTORS - R R

Removing ( Refitting ) See in Op. 1048B22 See in Op. 1048B141. Working on the fastening springs (1a) remove the sound insulation cover inspection flap (1b).2. Undo the connectors (2a) and remove the fuel supply pipe to the injectors (2b).- Carry out the same operation for all the pipes from the manifold to the injectors. Refitting ( Removing ) - Fit the fuel pipe in place.- Tighten the connectors checking the torque.

	Value - daNm	Fastening	Component	Ø
.	(Manifold end) 2.6 - 3.2	Connector	PIPE FUEL MANIFOLD TO INJECTORS	M14

	Value - daNm	Fastening	Component	Ø
.	(Injector end) 1.9 -2.3	Connector	PIPE FUEL MANIFOLD TO INJECTORS	M12

- Carry out the same operation for all the pipes from the manifold to the injectors.- Fit the inspection cover and secure it using the springs. See in Op. 1048B14 See in Op. 1048B22