312000172 - I039 DIRECTION INDICATORS NOT WORKING WHEN HAZARD WARNING LIGHT SWITCH IS PRESSED

The direction indicators do not come on when the hazard warning light button is pressed

		Test results
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node:- the plausibiilty of the hazard warning light on/off parameter	End of diagnosis	Parameter does not change status	Move on to Step 2
2	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Check the continuity of the wiring between the hazard warning light button and the Body Computer Node.    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Move on to Step 3	Wiring broken	Restore the correct connections    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
3	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Check hazard warning light button earth    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS	Move on to Step 4	Earth interrupted	Restore correct earth    See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS
4	CONTROL BUTTON OPERATION CHECK	All OK	Problems encountered	Operation
	Check the operation of the hazard warning light button	Move on to Step 5	Internal circuit interrupted	Replace the hazard warning light control    Op. 7040A56 SWITCH UNIT IN DASHBOARD - R.R.
5	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace body computer    Op. 5505A32 BODY COMPUTER - R.R