312000653 - K082 PASSENGER AIR BAG DISABLED WARNING LIGHT ON

On starting, the passenger Air Bag disabled warning light comes on and remains on for longer than 4 seconds (execution of control unit initial test)
Check in the Set-Up Menu that the switch is in the OFF position, the warning light should remain on.
The warning lights take the form of LEDs built into the electronic circuit and are NOT therefore replaceable
Test results
0KEY/SWITCH POSITION CHECKAll OKProblems encounteredOperation
Check in the SET-UP Menu that the passenger Air Bag exclusion is not activated.Move on to Step 1Passenger Air Bag exclusion activatedRestore the passenger Air Bag.
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket.

Check:

  • for faults in the air bag control unit;
  • the plausibility of all the parameters
Move on to Step 21. No communication with the control unit2. Error detected in the control unit1. Restore:a) connection between the Air Bag control unit and diagnostic connector;b) Air Bag control unit power supply    See E7030 AIRBAG 2. Continue following the instructions on the diagnostic equipment
2CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Check, in active diagnosis, that the passenger Air Bag disabled warning light is working correctly.End of diagnosisThe warning light does not flashReplace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R