312000661 - K102 DISPLAY MODULE NO SIGNAL - TO CHECK PANEL

The display module is turned on by the panel at key on and displays information for the user

		Test results
1	CHECK USING THE EXAMINER	All OK	Problems encountered	Operation
	Connect an Examiner and check in CAN Information that there are no control units in error	Move on to Step 2	Control unit faulty	Continue as instructed by the diagnostic equipment
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the display segments at the INSTRUMENT PANEL NODE by activating the Autotest function in active diagnosis	End of diagnosis	One or more segments do not come on	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R