312000671 - K137 VEHICLE PROTECTION SYSTEM WARNING LIGHT ON CONSTANTLY

The Engine Management Node sends a message via the C-CAN to the Body Computer, which makes it available via the B-CAN, to the Instrument Panel node.

Faults in the C-CAN will turn on the warning lights for the control units that communicate on this network. The "CAN INFORMATION" check is designed for this eventuality

		Test results
1	CHECKS USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect an Examiner and check at the CAN Information for the absence of faulty control units	Move on to Step 2	Faulty control units present	Continue as instructed by the diagnostic equipment
2	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	With the Examiner in Instrument Panel Node mode, check that the vehicle protection warning light is correctly activated in Active Diagnosis.	End of diagnosis	The warning light does not flash.	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R