312000699 - N009 TRIP COMPUTER WRONG READINGS
 | the trip computer indicates incorrect fuel consumption |
| Test results | ||||
| 1 | CHECK USING THE EXAMINER | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Connect an EXAMINER and check the following on CAN NETWORK INFORMATION:
| Move on to Step 2 | Control units with CAN faulty/Not activated | Continue as instructed by the diagnostic equipment | |
| 2 | TRIP COMPUTER SIGNALS CHECK | All OK | Problems encountered | Operation |
| Check the speed signal is working properly See E4080 TRIP COMPUTER Check the fuel level gauge is working properly | Move on to Step 3 | 1. Speed signal interrupted2.Fuel level signal does not conform3. Level signal interrupted | 1. Move on to Step 32. Replace fuel level gauge Op. 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R 3. Restore the correct continuity | |
| 3 | CHECK USING THE EXAMINER | All OK | Problems encountered | Operation |
| Connect to the ABS control unit and check that there are no errors | End of diagnosis | Presence of errors | Continue as instructed by the diagnostic equipment | |