312000748 - O033 BELT REWINDING FAILURE

The seat belt does not rewind correctly and/or fully after the buckle is undone
Test results
0PRELIMINARY CHECKSAll OKProblems encounteredOperation
Check visually for folds, fraying and/or damage to the belt that could prevent it from rewinding.Move on to Step 11. Folds are present on the front belt2. Folds are present on the rear belt3. Front belt strap damaged4. Rear belt strap damaged.1. Remove the folds and replace the belt if necessary    Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R 2. Remove the folds and replace the belt if necessary.    Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R. 3. Replace the front seat belt.    Op. 7065A12 FRONT SEAT BELT (ONE), LEFT OR RIGHT, WITH PRETENSIONER ON REEL - R.R 4. Replace the rear seat belt.    Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.
1CORRECT INSTALLATION CHECKAll OKProblems encounteredOperation
Check that the system installation is correct.End of diagnosisIncorrect installation.Proceed as instructed in the.    See table O031 SEAT BELTS LOCKED