| | Test results |
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|
| Having carried out the road test, during the See table S015 NOISE WHILST DRIVING, there was a whistling noise from the front.Continue depending on the circumstances in which the noise occurs. | End of diagnosis | 1. The noise increases when cornering2. The noise increases in vertical oscillation conditions. | 1. Replace the wheel bearing on the side where the noise is loudestOp. 4450C32 fitting it with the magnetic track facing the steering knuckle seal | This bearing is used by the ABS active sensors to calculate the wheel speed. It should NEVER come into contact with metal shavings because they could alter the gap and prevent a correct reading from the sensor |
2. Move on to Step 1 |
| 1 | BRAKE DISC CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the gap between the brake disc and the steel shield is sufficient. | Move on to Step 2 | Gap too small | Restore the correct gap |
| 2 | SHOCK ABSORBER STEM CHECK | All OK | Problems encountered | Operation |
|---|
| When the wheel is removed check that the noise is not due to irregular friction between the shock absorber stem and the gasket, checking the condition of the stem chrome surface. | End of diagnosis | There is irregular friction. | Lubricate the stem raising the dust cover, using a layer of silicon grease.If the noise persists, replace the shock absorber Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R |
