- Release the wiring looms connected to the retaining clips, fastened to the battery drip-tray.1. Undo bolts (1a) and nut (1b)2. Remove the battery drip-tray.
Refitting
(
Removing
)
1. Place the battery drip tray in its housing.2. Tighten battery drip-tray retaining bolts (2a) and nut (2b) to the specified torque.
Component
Fastening
dia
Value (daNm)
Validity
Battery drip tray
Nut
M8
2.5
all versions
Component
Fastening
dia
Value (daNm)
Validity
Battery drip tray
Bolt
M8
2.5
all versions
- Attach the wiring looms to the retaining clips, fastened to the battery drip-tray.- Reposition the lower plastic mount in its housing. Op. 5530B10 BATTERY - R+R
Removing
(
Refitting
)
Op. 5530B10 BATTERY - R+R
1. Prise up the plastic lower mount from the housing and remove it.
