312000240 - I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING

When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) it does not work. If the dipped headlamps are not working either, firstly see    See table I005 DIPPED HEADLAMPS NOT WORKING

		Test results
1	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check: Continuity of the wiring between the Body Computer and the instrument panel (+12V dipped headlights supply) Continuity of the wiring between the Body Computer and the headlight alignment motor (+12V motor supply) Continuity of the wiring between the instrument panel and the headlight alignment motors (headlight alignment correction positive control signal)     See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	Wiring broken	Restore the correct connections    See E3080 HEADLAMP AGLINMENT CORRECTOR
2	MOTOR EARTH CONNECTION CHECK	All OK	Problems encountered	Operation
	Check the connection to earth for the motors    See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 3	Earth defective	Restore the correct earth connection.
3	UP-DOWN BUTTONS CHECK	All OK	Problems encountered	Operation
	Check that the UP - DOWN buttons in the instrument panel are working properly	Move on to Step 4	Buttons defective	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R
4	HEADLAMP ALIGNMENT CONTROL CHECK	All OK	Problems encountered	Operation
	Check that the headlamp alignment motors are working properly    See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 5	Headlamp alignment motor faulty	Replace headlamp alignment motorOp. 5540C24 MOTOR (ONE) FOR L/H OR R/H HEADLAMP/LIGHT CLUSTER ALIGNMENT CORRECTION - R+R
5	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Replace Body Computer    Op. 5505A32 BODY COMPUTER - R.R