312000409 - 3340B57 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO RIGHT FRONT BRAKE - R.R. WITH POWER UNIT REMOVED

Removing ( Refitting ) 1. Undo the connector for the rigid pipe, ABS hydraulic control unit side. 1. Release the rigid pipe (1a) from the retaining clips (1b) secured to the bodyshell. 1. Undo the connector (1a) between the rigid pipe (1b) and the flexible pipe (1c) for the front brake caliper, right side. - Remove the pipe from its housing, releasing it from the wheel housing. Refitting ( Removing ) - Place the rigid pipe in position, fitting it via the wheel arch. 1. Tighten the connector (1a) between the rigid pipe (1b) and the flexible pipe (1c) for the front brake caliper, right side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipe to hose	Connector	M10x1	1.6	T.i.T

- Secure the rigid pipe to the retaining clips fastened to the bodyshell. 1. Tighten the connector for the rigid pipe, ABS hydraulic control unit side to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid brake pipes to A.B.S./E.S.P. control unit	Connector	M10x1	1.6	all versions

    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR