| | Test results |
| 1 | CHECK USING THE EXAMINER | All OK | Problems encountered | Operation |
|---|
| Connect an Examiner and check there are no control units in error in CAN Information | Move on to Step 2 | Faulty control units present | Continue as instructed by the diagnostic equipment |
| 2 | ACTIVE DIAGNOSIS CHECK | All OK | Problems encountered | Operation |
|---|
| With the Examiner in Instrument Panel Node mode, check that the Electric Steering warning light activates correctly in Active Diagnosis | Move on to Step 3 | The warning light does not flash | Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R |
| 3 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue as instructed in the See table H025 NO ELECTRIC STEERING POWER ASSISTANCE WITH FAILURE WARNING LIGHT ON |
