| | Test results |
| 1 | LOCK STRIKER CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the striker fastening is correct | Move on to Step 2 | Incorrect striker fastening | Restore the correct striker fastening Op. 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY |
| 2 | DOOR CONTROLS CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the door opens/closes correctly by operating the:- Spanner
- Exterior handle
- Interior handle
| Move on to Step 3 | 1. Lock faulty2. Fault in the exterior handle3. Fault in the interior handle | 1. Move on to Step 52. Move on to Step 33. Move on to Step 4 |
| 3 | EXTERIOR HANDLE CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the exterior handle | Move on to Step 4 | Exterior handle defective | Replace the exterior handle Op. 7005C11 FRONT SIDE DOOR EXTERIOR HANDLE - R.R |
| 4 | INTERIOR HANDLE CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the interior handle | Move on to Step 5 | Interior handle defective | Replace the interior handle Op. 7005C53 FRONT SIDE DOOR INTERIOR OPENING HANDLE (ONE), LEFT OR RIGHT - R.R. |
| 5 | LOCK FASTENING CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the lock is correctly fastened to the door | Move on to Step 6 | Fault in lock fastening | Restore the correct fastening of the lockOp. 7005N21 FRONT SIDE DOOR LOCK MOTOR/LOCK ASSEMBLEY FOR ONE DOOR, LEFT OR RIGHT - R.R. |
| 6 | RODS CHECK | All OK | Problems encountered | Operation |
|---|
| Check the control and/or safety links are correctly fastened to the lock and handle | End of diagnosis | 1. Control rods not correctly attached2. Control rods attachment not correct. | 1. Renew the correct fastening of the control linksOp. 7005C43 LINK CONNECTING FRONT SIDE DOOR BARRELS/CATCH - R+R2. Renew the correct fastening of the safety linkOp. 7005C71 LINK WITH KNOB FOR FRONT SIDE DOOR SAFETYCATCH - R+R |
