312001947 - 3340B74 RIGID PIPE FROM CONNECTOR TO REAR BRAKES . (ONE), LEFT OR RIGHT - R.R.

Removing ( Refitting ) - Position the vehicle on a lift. 1. Obstruct the brake fluid reservoir using the special tool.

Tool	Description	Function	Validity
2.000.001.400	Plug	Brake/ clutch system vacuum	all versions

1. Undo the connector for the rigid pipe, drum brake cylinder side. - Release the rigid pipe from the retaining clip. 1. Undo the connector (1a) and remove the rigid pipe (1b). Refitting ( Removing ) - Check that the flexible pipe is not damaged. If it is, replace it.- Place the rigid pipe in position and secure it to the retaining clips. 1. Connect the rigid pipe (1a) to the flexible pipe side and tighten the connector (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipe to hose	Connector	M10x1	1.6	T.i.T

1. Connect the rigid pipe, drum brake cylinder side and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipe on brake drum cylinder	Connector	M10x1	1.6	T.i.T

- Remove the tool used for obstructing the brake fluid reservoir.

Tool	Description	Function	Validity
2.000.001.400	Plug	Brake/ clutch system vacuum	all versions

    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.