4450D14 STUB AXLE FOR ONE REAR WHEEL HUB, LEFT OR RIGHT - R.R WITH HUB REMOVED - INCLUDES BUSH REPLACEMENT IF NECESSARY - CHECK WHEEL GEOMETRY SEPARATELY - Fiat - NUOVA 500 - eLearn

312001971 - 4450D14 STUB AXLE FOR ONE REAR WHEEL HUB, LEFT OR RIGHT - R.R WITH HUB REMOVED - INCLUDES BUSH REPLACEMENT IF NECESSARY - CHECK WHEEL GEOMETRY SEPARATELY

) 1. Unscrew the fitting and disconnect the rigid pipe connecting the rear brake to the cylinder.2. Undo the retaining bolts.3. Remove the rear drum brake assembly.

1. Undo the retaining nuts.2. Remove the wheel hub stub axle from the rear suspension.

Refitting ( Removing

) - Fit the wheel hub stub axle for the suspension.- Tighten the fixing nuts to torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear wheel stub axle (on rear suspension crossmember)	Nut	M10x1.25	6.5	T.i.T

- Connect the rigid rear brake pipe to the cylinder and tighten the fitting to torque.

Component	Fastening	dia	Value (daNm)	Validity
Rigid pipe on brake drum cylinder	Connector	M10x1	1.6	T.i.T

- Fit the rear brake caliper and tighten the bolts.