312002451 - 4420D48 REAR SUSPENSION AXLE/CROSSMEMBER BUSHES - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 7040L20 TUNNEL COVER - R.R     Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 4450B06 LEFT REAR WHEEL - R.R     Op. 4420D10 REAR SUSPENSION AXLE - R+R INCLUDES BLEEDING - Remove both rear suspension axle supports.    Op. 4420D30 REAR SUSPENSION AXLE AXLE SUPPORT, LEFT OR RIGHT - R.R. 1. Position the special tool and extract the bush.

Tool	Description	Function	Validity
2.000.025.600	Extractor/ fitting tool	Removing-refitting rear axle bush	all versions

- Proceed in the same way for the opposite axle bush.- Keep the special tool. Refitting ( Removing ) - Position a new bush and check the alignment.

Use soapy water to facilitate fitting the bush in place.

1. Position the special tool (1a) and fit the bush (1b) in place.

Tool	Description	Function	Validity
2.000.025.600	Extractor/ fitting tool	Removing-refitting rear axle bush	all versions

- Proceed in the same way for the opposite axle bush.- Keep the special tool.- Fit both rear suspension axle supports.    Op. 4420D30 REAR SUSPENSION AXLE AXLE SUPPORT, LEFT OR RIGHT - R.R.    Op. 4420D10 REAR SUSPENSION AXLE - R+R INCLUDES BLEEDING     Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 4450B06 LEFT REAR WHEEL - R.R     Op. 7040L20 TUNNEL COVER - R.R - Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

- Remove the vehicle from the lift.