312000425 - 5010A16 HEATER WATER RETURN PIPE - R.R.
Removing ( Refitting ) - Position the vehicle on a lift.- Position a suitable container for collecting the coolant. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 1048B44 RIGID AIR SUPPLY PIPE BETWEEN HEAT EXCHANGER AND INTAKE MANIFOLD - R.R. 1. Open the retaining band (1a) and disconnect the heater water return pipe (1b), heater side.
1. Open the retaining band (1a) and disconnect the heater water return pipe (1b), water pump side.2. Open the retaining clip (2a) and remove the pipe (2b) from its housing.
Refitting
(
Removing
)
- Check that the pipe is not damaged. If it is, replace it.- Place the pipe in position and connect it to the heater, securing it using the retaining band.- Connect the pipe, water pump side and secure it using the retaining band. Op. 1048B44 RIGID AIR SUPPLY PIPE BETWEEN HEAT EXCHANGER AND INTAKE MANIFOLD - R.R. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R Op. 0010T20 ENGINE COOLANT - CHANGE - Remove the vehicle from the lift.