312000499 - 1024B10 ENGINE FLYWHEEL - R + R FOR VERSIONS WITH MANUAL GEARBOX
Removing
(
Refitting
)
- Position the vehicle on a lift. Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 4450B12 FRONT WHEELS (TWO) - R+R Op. 5520C20 HEATER PLUGS CONTROL UNIT - R.R Op. 5520B10 STARTER MOTOR - R+R Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R. Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R. Op. 1088E10 RADIATOR COOLING FAN - R + R Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 7210E10 R.R. FRONT BUMPER Op. 7210A48 R.R THIRD LOAD LINE Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE Op. 1008A42 POWER UNIT RIGID SUPPORT - GEARBOX SIDE - R.R. Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R Op. 1810A20 CLUTCH - R + R
1. With flywheel lock (1a) fitted, undo bolts (1b) and remove flywheel (1c).| Tool | Description | Function | Validity |
|---|---|---|---|
| 1.860.846.000 | Counter-torque | Engine flywheel lock | all versions |
 | The bolts securing the flywheel are pre-treated with sealant, therefore they should be replaced each time they are removed. |
Refitting
(
Removing
)
1. Place the engine flywheel (1a), complete with flange (1b), back in its housing and secure it tightening the new bolts (1c) to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine flywheel (on crankshaft) | Bolt | M8x1.25x22 | 4.4 | 1.3 Multijet |
