312002321 - 1060F34 PIPE FROM FUEL MANIFOLD TO INJECTOR - R.R.

Removing ( Refitting )     Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Disconnect the rapid connector for the fuel supply pipe from the filter to the pressure pump, pressure pump side.2. Undo the fixing bolts (2a) and remove the support (2b) for the degassing pipes and the fuel filter.
1. Press the clip (1a) and disconnect the fuel supply pipe (1b), for the connector to be removed.2. Unscrew the connectors (2a) and remove the pipe from the manifold to the injector (2b) involved.
Refitting ( Removing )
Always replace the pipes.
1. Fit the new pipe (1a) and tighten the connectors (1b) to the recommended torque.
Component Fasteningdia  Value (daNm)Validity
Fuel supply pipes to the injectorsConnectorM12x1.52.41.3 Multijet
2. Connect the fuel supply pipe (2a) and fasten it using the retaining clip (2b).
- Fit the support for the degassing pipes and the fuel filter in place and tighten the fixing bolts.- Connect the rapid connector for the fuel supply pipe from the filter to the pressure pump, pressure pump side.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.