312002405 - 1080D28 OIL VAPOUR RECOVERY PIPE BETWEEN SEPARATOR AND TURBO - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R 1. Disconnect the electrical connection for the fuel pressure regulator.

	Description	Connector
1	Fuel pressure regulator	See N077 FUEL PRESSURE REGULATOR

1. Disconnect the connector from the oil vapour recovery pipe to the turbocharger air inlet hose. 1. Undo bolts (1a) and release pipe from retaining clip (1b). 1. Undo retaining bolts (1a) and release separator (1b).2. Open band (2) and remove the oil vapour recovery pipe between separator and turbo (2b). Refitting ( Removing ) 1. Connect oil vapour recovery pipe (1a) between the separator and the turbo and secure it with a new retaining band (1b).2. Fit oil vapour separator (2a) and tighten bolts (2b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Oil vapour separator (on intake manifold)	Bolt	M6x1x20	0.9	1.3 Multijet

- Secure the oil vapour recover pipe to the retaining clip and screw in the bolts.- Connect the connector from the oil vapour recovery pipe to the turbocharger air inlet hose. 1. Connect the electrical connection for the fuel pressure regulator.

	Description	Connector
1	Fuel pressure regulator	See N077 FUEL PRESSURE REGULATOR

    Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Remove the vehicle from the lift.