312002636 - 7050A58 REAR SEAT BACKREST STRIKER - R.R.
Removing
(
Refitting
)
Op. 7040H80 REAR PARCEL SHELF - R.R. Op. 7050A19 REAR SEAT BACKREST - R.R Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. Op. 7040L42 Op. 7040L40 FRONT DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R. Op. 7040H38 CENTRE PILLAR UPPER ELEMENT (ONE), LEFT OR RIGHT - R.R Op. 7040H42 REAR PILLAR TRIM (ONE), LEFT OR RIGHT- R.R Op. 7040H50 REAR PANEL (ONE), LEFT OR RIGHT - R.R
1. Undo bolts (1a) then remove the striker from rear seat backrest (1b).
Refitting
(
Removing
)
- Fit the backrest striker in position and tighten the bolts.- Lift the backrest once or twice, bringing it to the closing position on the striker; check the seat opens and closes correctly.
1. The inner striker hole is adjustable because it is slotted and can be regulated in the arrowed directions.2. Screw in the bolts and tighten them to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rear seat backrest striker | Bolt | M10x1.25 | 4.0 | all versions |
