312000487 - 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.
Removing
(
Refitting
)
- Position the vehicle on a lift. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE Op. 1076B20 REAR EXHAUST SILENCER - R + R Op. 1076B40 CENTRE EXHAUST PIPE - R.R.
1. Undo the bolts (1a) and remove the power unit rigid support (1b).
Refitting
(
Removing
)
1. Fit the power unit rigid support (1a) and tighten the fixing bolts (1b) to the recommneded torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing system side engine mounting (on engine block and cylinder head) | Bolt | M10x1.25x90 | 6.0 | 1.3 Multijet |
