| 1 | Pressure delta at the fuel filter check Disconnect the negative battery leadConnect the diagnostic equipment pressure transducer across the delivery pipe and the fuel filter inlet connector (points 1-2) using Kit N° 2000024503 and Kit 1870885003 (connection pipes) used with Kit EX 07 contained in case N° 1806338000.Reconnect the negative battery leadTurn the ignition key to MAR.Note down the pressure shown on the Examiner (2.8 - 3.2 bar)Turn the ignition key to STOPDisconnect the negative battery leadDisconnect the transducer from the filter inlet and connect it across the filter outlet connector and the outlet delivery pipe (point 3-4).Reconnect the battery, turn the ignition key to MAR,Note down the pressure shown on the Examiner (2.4 - 2.8 bar)Check that the pressure delta between the filter inlet and outlet is no greater than 0.4 Bar | Replace the fuel filter Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE |
