312002956 - P0194 Pressure sensor on injectors support signal

The error is detected if the electrical value is within the range, but the signal is not plausible because the pressure is lower than an absolute minimum threshold

		Test results
1	INTAKE CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check that the intake circuit is working properly by carrying out theSee Test 1048OA	Move on to Step 2	-	-
2	AMBIENT PARAMETERS CHECK	All OK	Problems encountered	Operation
	Select the following control unit at the diagnostic equipment: Marelli Diesel Injection 6F3 EOBD CAN (EP engine 1.3 JTD).Check the value of the following parameters:. Atmospheric pressureSee Test 1060GD - Supercharging pressure measuredSee Test 1060GF	Move on to Step 3	-	-
3	PRESSURE SENSOR REPLACEMENT	All OK	Problems encountered	Operation
	The pressure sensor on the flute is blocked, replace    Op. 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R	End of diagnosis