312003023 - P2452 Differential pressure sensor
The diagnostic equipment signals: Error P2452 (differential pressure sensor). | This error is recognized if the signal is above a level > 4.8 Volt and below a level < 0.2 Volt. |
| Test results | ||||
| 1 | WIRING CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
| Check that the sensor connections are properly insertedCheck the wiring continuity See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT Check the wiring insulation | Move on to Step 2 | 1. Connections not correctly fitted2. Wiring interrupted3. Wiring insulation not correct | 1. Renew the correct connections2. Restore the correct wiring continuity.3. Restore the correct wiring insulation. | |
| 2 | Check on the operation of the differential pressure sensor | All OK | Problems encountered | Operation |
| Check correct operation of the differential pressure sensor by carrying out the See Test 1080BF DIFFERENTIAL PRESSURE SENSOR OPERATION CHECK | End of diagnosis | |||