312000718 - 3340B ABS SYSTEM PIPES

Introduction

The ABS pipes can be divided into three groups:

• brake pump pipes to ABS control unit;
• rigid connecting pipes from the ABS control unit to the front and rear flexible pipes. The rear brake pipes are divided into two sections, for fitting requirements, and they are protected by a special shield in the section exposed to the risk of damage;
• flexible connecting pipes between the rigid pipes and the brake callipers.

The rigid and flexible pipes are secured to the body by special brackets and/or fastening clips.Pipes between the pump and the control unit.1. A.B.S. electrohydraulic control unit2. Brake pump3. Rigid pipe from master cylinder to A.B.S. control unit: for brake operation: right front and left rear4. Rigid pipe from master cylinder to A.B.S. control unit: for brake operation: left front and right rearFront and rear section pipes.1. Rigid pipe from A.B.S. control unit to left front brake2. Rigid pipe from A.B.S. control unit to right front brake3. Front section of rigid pipe from A.B.S. control unit to right rear brake4. Front section of rigid pipe from A.B.S. control unit to left rear brake5. Rear section of rigid pipe from A.B.S. control unit to right rear brake6. Rear section of rigid pipe from A.B.S. control unit to left rear brake7. Rear hoses8. Front hoses9. Right rear rigid pipe10. Left rear rigid pipe11. Lower guard