312000546 - 5560BV Check the instrument panel power supply

STEP	CHECK TO BE PERFORMED	REMEDIAL ACTION IF THE CHECK IS NOT OK
1	Earth terminal checkDisconnect the panel connector.Check that the resistance is less than 1 Ohm by connecting an ohmmeter between pin 1 and earthMove on to Step 2	Restore the correct earth connection.
2	Check on +15 power supplyTurn the key to the ON positionCheck that there is a voltage of 12 V by connecting the voltmeter between pin 3 and the earth    See E4010 INSTRUMENT PANEL	Restore the broken wiring between the Body Computer and Instrument Panel.
3	Check on +30 power supplyCheck that there is a voltage of 12 V by connecting the voltmeter between pin 2 and the earth    See E4010 INSTRUMENT PANEL	Restore the broken wiring between the Body Computer and Instrument Panel.

Instrument panel connector pin out
Pin	Function
1	Earth
2	+30
3	+15
4	N.C.
5	CAN A
6	CAN B
7	Headlamp alignment corrector actuator signal reference
8	+ Dipped headlight
9	TRIP control from steering column switch unit
10	N.C.
11	N.C.
12	N.C.
13	N.C.
14	N.C.
15	N.C.
16	N.C.
17	Warning light from Micro
18	Warning light from Micro