K018 CITY WARNING LIGHT DOES NOT SWITCH WHEN BUTTON IS OPERATED - Fiat - NUOVA 500 - eLearn

When the CITY button is pressed repeatedly, the warning light in the panel does not switch

1	CHECK USING THE EXAMINER	All OK	Problems encountered	Operation
		Test results
	Connect to the CAN information using the Examiner and check there are no faulty control units	Move on to Step 2	Faulty control units present	Continue as instructed by the diagnostic equipment
2	ACTIVE DIAGNOSIS CHECK	All OK	Problems encountered	Operation
	With the Examiner in the Instrument Panel Node ambient check that the CITY warning light is correctly activated/deactivated in Active Diagnosis	Move on to Step 3	The warning light does not flash	Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R
3	ELECTRICAL SYSTEM CHECK	All OK	Problems encountered	Operation
	Check that the CITY button is working properlyCheck the continuity of the wiring between the CITY button and the Body Computer See E7045 ELECTRIC STEERING	End of diagnosis	1. CITY button defective2. Wiring broken	1. Replace the control panel in the dashboard Op. 7040A56 SWITCH UNIT IN DASHBOARD - R.R. 2. Restore correct wiring