| | Test results |
| 1 | FUEL RESERVE WARNING LIGHT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fuel reserve warning light is off | Move on to Step 2 | Fuel reserve warning light on | Top up the fuel level so that it is not in the reserve zone and continue to Step 4 |
| 2 | FUEL LEVEL CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fuel level gauge is working properly | Move on to Step 3 | Fuel level gauge not working | Proceed as instructed in the See table K020 FUEL LEVEL GAUGE NOT WORKING |
| 3 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Connect the diagnostic instrument (Examiner or Examiner Plus) and check there is no Misfiring error | End of diagnosis | The misfire error is present | Proceed as instructed by the diagnostic equipment |
| 4 | ERROR CANCELLING AND CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Using the diagnostic equipment, cancel the errors in the control unit.Road test the vehicle and check that the error does not occur again | Move on to Step 5 | The misfire error is present | Proceed as instructed by the diagnostic equipment |
| 5 | CORRECT OPERATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the fault is no longer present | End of diagnosis | | |
