| | Test results |
| 1 | ALTERNATOR CHECK | All OK | Problems encountered | Operation |
|---|
| Check carrying out See Test 5530AB Check alternator operationthat the alternator operates correctly | End of diagnosis | Alternator operating faults | Move on to Step 2 |
| 2 | ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
|---|
| Check the continuity and insulation of the electrical circuit between the battery, starter motor and alternator See E5010 STARTING AND RECHARING | Move on to Step 3 | 1. Connections faulty2. Alternator defective | 1. Restore the correct connections2. Replace the alternator.Op. 5530A10 |
| 3 | ACTIVE DIAGNOSIS CHECK | All OK | Problems encountered | Operation |
|---|
| With the Examiner in Instrument Panel Node mode, check that the generator warning light is correctly activated in Active Diagnosis. | Move on to Step 4 | The alternator warning light is not activated | Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R |
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Using an Examiner check, in Body Computer Node mode, that there are no errors. | Move on to Step 5 | Presence of errors | Continue following the instructions on the diagnostic instrument |
| 5 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Check that the Body Computer Node is working properly | End of diagnosis | Body Computer defective | Replace Body Computer Op. 5505A32 BODY COMPUTER - R.R |
