| | Test results |
| 1 | INSTRUMENT PANEL FUNCTIONS CHECK | All OK | Problems encountered | Operation |
|---|
| Check: - That the display shows the correct time
- That it is possible to adjust the time
- That the clock moves forward
| End of diagnosis | 1. The time displayed is not correct2. It is not possible to adjust the time3. The clock stays still | 1. Set the correct time2. Move on to Step 23. Move on to Step 3 |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket.Check that there are no faults in the instrument panel | Move on to Step 3 | Presence of errors | Continue following the instructions for the diagnostic equipment |
| 3 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
|---|
| Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the display in active diagnosis. | End of diagnosis | Display defective | Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R |
