312000657 - K095 INSTRUMENT PANEL NOT WORKING
 | With the ignition ON, some of the warning lights are not timed and the instruments are not working with the engine running. |
| Test results | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Connect an EXAMINER and check the following on CAN NETWORK INFORMATION:
| Move on to Step 1 | Fault on CAN network | Continue following the instructions given by the diagnostic equipment | |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Using the Examiner in the Instrument Panel Node mode, check that there are no errors and that the parameters are present | Move on to Step 2 | 1. Presence of errors2. Communication with the instrument panel impossible | 1. Continue following the instructions on the diagnostic instrument2. Move on to Step 2 | |
| 2 | ELECTRICAL POWER SUPPLY CHECK | All OK | Problems encountered | Operation |
| Check the electricity supply to the Instrument Panel Node is correct by carrying out the See Test 5560BV Check the instrument panel power supply | Move on to Step 3 | 1. Supply not correct2. Connection to panel not correctly connected | 1. Restore correct power supply See E4010 INSTRUMENT PANEL 2. Fit the connection correctly | |
| 3 | CHECK ON CORRECT OPERATION OF INSTRUMENT PANEL | All OK | Problems encountered | Operation |
| Check that the instrument panel is working properly | Move on to Step 4 | Instrument panel defective | Replace the Instrument Panel Op. 5560B10 CONTROL PANEL - R+R | |
| 4 | BODY COMPUTER CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
| Check the suppy is correctCheck that the connections are correctly connectedCheck that the Body Computer is working properly | End of diagnosis | 1. Supply not correct2. Connections to the Body Computer not correctly connected3. Body Computer defective | 1. Restore correct power supply2. Renew the connections3. Replace Body Computer Op. 5505A32 BODY COMPUTER - R.R | |