312000675 - K143 ONE WARNING LIGHT ACTIVATED BY STEERING COLUMN SWITCH UNIT NOT WORKING

When the lights are activated using the stalk, the relevant warning light does not light up on the instrument panel N.B: The warning lights activated when the steering wheel interface is operated are:

• Side lights/number plate lights
• Main beam headlamps
• Direction indicators

		Test results
0	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	With the key to MAR, operate all the lights using the steering wheel interface, i.e.: Using the wheel, side lights/number plate lights With the stalk, high beams (both fixed and flashing positions) With lever, direction indicators (right and left) and check that they are activated	Move on to Step 1	1. The side lights do not work2. The full beam headlamps do not work3. The direction indicators do not operate on both sides4. The direction indicators do not operate on one side	1. Continue as indicatedSee table I001 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING2. Continue as indicated    See table I006 MAIN BEAM HEADLAMPS NOT WORKING 3. Continue as indicated    See table I010 DIRECTION INDICATORS / HAZARD WARNING LIGHTS NOT WORKING 4. Continue as indicated    See table I012 LEFT OR RIGHT DIRECTION INDICATORS NOT WORKING
1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment and check the operation of the warning lights in the INSTRUMENT PANEL NODE by means of active diagnosis	End of diagnosis	The warning lights do not come on	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R