312001696 - 4410CA FRONT ANTI-ROLL BAR CHECKS
Position the vehicle on a two column lift.Raise the vehicle and check that the anti-roll bar is correctly positioned (transversely) in relation to the centre line.Check that the paint is not worn at the contact points between the bar and the wishbones.Using a torque wrench calibrated to the recommended value, check that the fastenings securing the anti-roll bar to crossmember (1) are tightened to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Anti-roll bar (on suspension crossmember) | Bolt | M8 | 2.0 | all versions |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Anti-roll bar (to reaction rod) | Nut | M10x1.25 | 5.0 | all versions |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Reaction rod (on front shock absorber) | Nut | M10x1.25 | 5.0 | all versions |
